Receiving A Call Alert Page; Sending A Call Alert Page; Emergency Operation - Motorola APX Series User Manual

Receiving a Call Alert Page

When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. The call
received icons blinks and the display shows PAGE RCV.
Press any button to clear the Call Alert page.

Sending a Call Alert Page

Your radio must be preprogrammed for you to use this
feature.
• Press the preprogrammed Quick Access (One-
Touch) Call Alert Paging button to send a page to
the preprogrammed ID.
If the call alert page is sent successfully, a tone
sounds and the display shows the current zone and
channel name.
If the call alert page is not acknowledged, a tone
sounds and the display shows the current zone and
channel name.

Emergency Operation

The Emergency feature is used to indicate a critical
situation.
If the Top (Orange) button is preprogrammed to send an
emergency signal, this signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm
Check with your dealer or system administrator for more
information on the programming of this feature.
Only one of the Emergency modes above can be assigned
to the preprogrammed Emergency button.
The radio operates in the normal dispatch manner while in
Emergency Call, except if enabled, it returns to one of the
following:
Tactical/Non-Revert
The radio sends emergency alarm and/or make
emergency call on the current selected channel.
English
61