List Of Parameter Nos - Mitsubishi Electric RD78G4 User Manual

3.6

List of Parameter Nos.

If there is an error in the parameter settings and the parameter No. is displayed, the corresponding parameter can be
identified.
It is displayed in "Detailed information" in the [Error Information] tab in the "Module Diagnostics" window of the Motion module.
( Page 52 Error Information)
Item
Required Settings
Basic Settings
3 TROUBLESHOOTING
82
3.6 List of Parameter Nos.
Station Type
Network No.
Station No./IP Address Station No.
Setting
IP Address
Network Configuration Total number of stations
Settings
Simple Display,
Detailed Display
Detailed Display
Network Topology
Communication Period Basic Period Setting
Setting
Connection Device Information
Slave Station Setting
Station Type
Network No.
Station No.
IP Address
Subnet Mask
Default Gateway
STA#
Station Type
RX Setting
RY Setting
RWr Setting
RWw Setting
LB Setting
LW Setting
Parameter Automatic Setting
PDO Mapping Setting
IP Address
Subnet Mask
Default Gateway
Reserved/Error Invalid Station
Network Synchronous Communication
Communication Period Setting
Station Information Alias
Comment
Station-specific mode
setting
Motion Control Station
Network Topology
Setting in Units of 1s
Communication Period Interval Setting (Do Not
Set it in Units of 1s)
Communication Period Interval Setting (Set it in
Units of 1s)
Cyclic Transmission Time
Transient Transmission Time
Authentication Class Setting
Disconnection Detection Setting
Parameter No.
7100H
7100H
7100H
A012H
A012H
A013H
A100H
A104H
A104H
A101H
A101H
A101H
A101H
A101H
A101H
A104H
A109H
A105H
A105H
A105H
A001H: Reserved Station
A002H: Error Invalid
Station
A045H
A108H
A011H
A011H
A106H
A104H
A100H
A100H
A100H
A100H
A100H
A100H
A100H
A100H