● Get_Measurement_Values
The command returns the requested measured value using the measured value ID
● Get_Measurement_Values_with_object_number
The command returns the requested measured values using the measured value ID and
the object number. The object number corresponds to the drive object ID.
Error values
Table 3- 15
Error
value 1
001 hex
03 hex
04 hex
06 hex
07 hex
08 hex
50 hex
51 hex
52 hex
53 hex
54 hex
Fieldbuses
Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
Error values in the parameter response
Meaning
Invalid Service_Request_ID
Invalid Modifier
Invalid Data_Structure_Identifier_RQ
No PE energy-saving mode supported
Response too long
Invalid Block Header
No suitable energy-saving mode available
Time is not supported
Impermissible PE_Mode_ID
No switch to energy saving mode because of state operate
service or function temporarily not available
Communication via PROFIBUS and PROFINET
3.6 Communication via PROFINET
69