Sony WALKMAN MZ-NH1 Operating Instructions Manual page 23

4
Record a disc.
1
Select and pause the sound source to
be recorded.
3
While the recorder is stopped, press
and slide zREC on the recorder.
"REC" and the REC lamp light up and
recording starts.
To
Stop
Pause
Remove the disc
1)
A track mark is added at the point where you press
the remainder of the track will be counted as a new track.
PAUSE
Connected component
zREC
Press
Press x.
1)
Press X .
Press X again to resume recording.
Press x and open the lid. (The lid does not open while "SYS
WRITE" flashing in the display.)
2
Make sure that disc indication has
stopped rotating in the display window
on the recorder.
Make sure that disc indication has
stopped.
4
Play the source you want to record.
If you insert a previously recorded disc,
the recording starts after the existing
contents.
Track marks are automatically added at
the same point as the sound source, and
the contents are recorded together as a
group.
X
again to resume recording while pausing; thus
PAUSE
Connected component
23