Sony WALKMAN MZ-NH1 Operating Instructions Manual page 56

The buttons and control used for
character input and their functions are
listed below.
Functions
To move the cursor to the
left or right in the letter
input area.
To select a letter in the
letter input area.
To enter a letter.
To enter a title.
To switch between capital
letters, small letters, and
numbers/marks.
To insert a blank space.
To delete a letter.
To cancel labeling.
To move the cursor to
the right or left in the
character palette.
To move the cursor up
and down in the
character palette.
To move the cursor from
the letter input area to
the character palette.
To move the cursor from
the character palette to
the letter input area.
To display "_ (space)",
":", "/", or "–" at the
input position in the
letter input area.
To switch between capital
letters and small letters.
1)
Functions of the buttons or the controls may
differ depending on when the cursor is in the
letter input area or in the character palette.
56
Operation 1)
Slide the jog lever
(., >).
Turn the jog dial.
Press the jog dial
or the jog lever
(NX • ENTER).
Press the jog dial
or the jog lever
for 2 seconds or
more (NX •
ENTER).
Press P-MODE •
REPEAT.
Press VOL +.
Press VOL –.
Press x for 2
seconds or more.
Slide the jog
lever
(.,
.
>)
Turn the jog dial.
Press DISPLAY
• BACKLIGHT.
Press or
x
DISPLAY •
BACKLIGHT.
Press SOUND •
SOUND SET.
Press SOUND •
SOUND SET.
5
Repeat step 3 and 4 enter all
characters of the label title.
6
Press the jog dial for 2 seconds or
more.
Note
When the recording is stopped or the recording
moves on to the next track while labeling titles
during recording, the input at that point is
entered automatically.
Re-labeling
You can change the track name, artist
name, album name, group name, or disc
name by doing the procedure for
"Labeling" (page 55).
To re-label a track name, artist
name, or album name:
Start playing the track you want to re-
label, and then change the track name,
artist name, or album name while the
recorder is playing, or while the recorder
is stopped and the track to be re-labeled is
currently selected.
To re-label a disc:
You can re-label the disc while the
recorder is stopped, recording, or playing.
Notes
•
The recorder is able to display, but cannot
label using Japanese "Katakana" characters.
•
The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device (in MD mode only).