Adjusting The Dispensing Unit For The Press - HP IndiChrome User Manual

Adjusting the dispensing unit for the press

The Series 3000/4000/5000 and UltraStream-based presses use ink cans that are taller
than those used by the Series 1000/2000, TurboStream-based, and Sun computer-based
presses. Consequently, the dispensing unit must be adjusted to the height of the ink cans
used by the press for which you are preparing custom ink.
The dispensing unit can accommodate two nozzles: a short one for the Series
3000/4000/5000 and UltraStream-based presses and a long one for the Series
1000/2000, TurboStream-based, and Sun computer-based presses. The nozzle is
screwed onto the top can holder.
Adjusting the dispensing unit
When dispensing to an empty Series 3000/4000/5000 or UltraStream-based ink can,
place it directly on the weighing pan. When dispensing to an empty Series 1000/2000,
TurboStream-based, or Sun computer-based ink can, place it on a spacer ring on the
electronic scale weighing pan.
Note The nozzle that is not in use can be stored in the nozzle storage hole. Adapter rings (used when
shaking cans) that are not being used can be stored on the ring holder.
ENWW
Long nozzle
Short nozzle
Weighing
pan
Ring
holder
Adjusting the dispensing unit for the press 35
Can holder
(top)
Nozzle
Nozzle
storage hole
Spacer ring
(Series 1000/2000,
TurboStream-based, and
Sun computer-based only)