HP IndiChrome User Manual page 41

Configure Color Matching Parameters window
8
9
Note The practical difference between 10° and 2° is insignificant.
10 In the Color Difference section, select the parameter to be used to indicate the color
11 The Level of Gloss parameter contents matches the choice made in step 4. Select a
12 Click the Substrates drop-down list. If the substrate is white, click Default substrate. If
40 Chapter 4 General procedures
In the Illuminant section, select the type of lighting conditions that your customers use
to check their printed output.
In the Observer section, select the spectrophotometer's angle of measurement. The
default is 10°.
difference between the best or actual mix and the target color. See "∆E*
96 for an in-depth explanation of ∆E*
different value only if necessary.
the substrate is other than white, do one of the following:
• Select the substrate from the list that most closely matches your substrate.
• Add a new substrate (refer to "Adding a new substrate" on page 74).
.
94
" on page
94
ENWW