Silvercrest SBT 3.6 C1 Operating Instructions Manual page 36

1) Remove any fitted attachment ( ,
2) Lift the two internal restraints with a small screwdriver or similar to the top and press
them outwards, so that the side elements of the appliance can be released.
3) Loosen the two now visible screws. You can then take the housing apart.
4) Snip the red and black cables that connect the circuit board with the blue jacketed
battery. You can now remove the battery from the appliance.
Dispose of the battery in an environmentally friendly manner.
Please observe applicable regulations. Please contact your
waste disposal facility if you are in any doubt.
Never dispose of the appliance in the normal domestic
waste. This product is subject to the provisions of European
Directive 2012/19/EU.
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility. Please observe applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Do not dispose of the mains adapter with the normal house-
hold waste. This mains adapter is subject to the provisions of
European Directive 2012/19/EU WEEE (Waste Electrical and
Electronic Equipment).
Dispose of the mains adapter via an approved disposal centre or at your
community waste facility. Please comply with all applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
SBT 3.6 C1
, , ) from the appliance.
GB │ IE │
33 ■