Setting The Signal Type - Silvercrest 284941 Assembly, Operating And Safety Instructions

Press the chime button
in synchronise mode. If the receiver receives the signal, the steady
blue light of the signal indicator
that the synchronization is successful.

Setting the signal type

The receiver can indicate the reception of a door signal either both
optically and acoustically, acoustically or optically.
Using the signal type selector button
signal is to be indicated both optically and acoustically or acous-
tically or optically.
Press the signal type selector button
signal will sound up and the afterwards the signal indicator
will flash. The receiver will now indicate the door signal acousti-
cally and optically. Press again the signal type selector button
An acoustical signal will sound. The receiver will now indicate the
door signal acoustically. Press again the signal type selector
button . The receiver will now indicate the door signal in an
3
optical way.
of the transmitter, while the receiver is
9
flickers 6 times to indicate
1
3
3
, select whether the
once. An acoustical
1
.
3
GB 13