GE T2100-ST1 Service Manual page 11

WARNING:
WARNING:
Before permitting anyone to use the T2100-ST Series, do the
following:
• Warn each user about the risk of falling while the belt is in
• Stress the need for caution.
• Demonstrate the proper mounting and dismounting
• Show each user how to use the T2100-ST Series as
• Ask each user to perform a supervised "test usage" at
•
WARNING:
Serious injury or death could result from electrical shock. To
reduce the possibility of electrical shock, carefully observe
the following precautions.
• To disconnect the treadmill, set the power switch to the
• Never operate the unit with a damaged power cord or
2097937-002 Rev G
11 March 2019
The T2100-ST1 and T2100-ST2 treadmills must be grounded
to reduce the risk of electrical shock. If a malfunction
occurs, grounding provides a path of least resistance for an
electric current. Ungrounded connections must not be
used.
No other equipment may be used on the electrical circuit
with the treadmills. Do not use extension cords. Using a
shared or unreliable circuit can also cause the treadmills to
unexpectedly shut off, potentially resulting in injury to the
patient.
Ensure the master power switch is in the off position before
plugging in the T2100-ST1 or T2100-ST2. A power surge
could damage the sophisticated electronic system of the
treadmills.
motion.
methods.
described in this manual.
minimum belt speed to review and practice usage
techniques.
Observe all the precautions listed under "Customer "on
page 18 to reduce the possibility of serious injury as a
result of falling or a loss of balance.
OFF position, and remove the plug from the outlet. When
the power is off, the green light on the power switch is
dark.
plug.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Introduction
11