March - GE T2100-ST1 Service Manual

Product Overview
shock. Proper grounding is necessary for the equipment to meet
acceptable current leakage standards consistent with the
standards to which it was certified.
110-120 VAC
NEMA 5-20R
Single Phase
250 VAC
Type N BRAZIL
240 VAC
GB 1002
WARNING:
32
220/240 VAC
NEMA 6-15R
Split Phase
230 VAC
BS1363
250 VAC
Type H ISRAEL
The T2100-ST1 and T2100-ST2 treadmills must be grounded
to reduce the risk of electrical shock. If a malfunction
occurs, grounding provides a path of least resistance for an
electric current. Ungrounded connections must not be
used.
No other equipment may be used on the electrical circuit
with the treadmills. Do not use extension cords. Using a
shared or unreliable circuit can also cause the treadmills to
unexpectedly shut off, potentially resulting in injury to the
patient.
Ensure the power switch is in the off position before
plugging in the T2100-ST1 or T2100-ST2. A power surge
could damage the sophisticated electronic system of the
treadmills.
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
230 VAC
AS/NZS 3112
240 VAC
BS546 3 PIN Type K DANISH
250 VAC
Type L ITALY
220/240 VAC
CEE 7/7 EURO
250 VAC
250 VAC
Type J SWISS
2097937-002 Rev G

11 March 2019