13
Connections
The AA units 1736 main board is equipped with a plug-in terminal block (J1:1-
8) for the cable connections. Up to 1.5 mm
Figure 4. Alert Annunciation units 1736 Connections
The connections to the terminal block "J1". The jumper "JP8" only has to be on
place (shunted) if the unit is the last unit on the line.
NOTE! The AA units 1736 can in FT512 only be connected to a 1587 board.
In FT128: +24 V / 0V / S0 / S1 to terminal block J1: 13 / 14 / 15 / 16.
In FT1020G3: +24 V / 0V / S0 / S1 to terminal block J4: 35 / 36 / 37 / 38.
Figure 5. 1736 PCB position of terminal block "J1", jumper "JP8"
2
conductor area can be used.
J1
27
Technical Description
AAU 1736 – Rev 1
EBL512