Table of Contents
Advertisement
Using Stabilizer/Conditioner
Use a fuel stabilizer/conditioner in the machine to
provide the following benefits:
•
Keeps fuel fresh during storage of 90 days or less.
For longer storage it is recommended that the fuel
tank be drained.
•
Cleans the engine while it runs
•
Eliminates gum-like varnish buildup in the fuel
system, which causes hard starting
Important:
Do not use fuel additives
containing methanol or ethanol.
Add the correct amount of fuel stabilizer/conditioner
to the fuel.
Note:
A fuel stabilizer/conditioner is most
effective when mixed with fresh fuel. To minimize
the chance of varnish deposits in the fuel system,
use fuel stabilizer at all times.
Filling the Fuel Tank
1.
Park the machine on a level surface and stop
the engine.
2.
Allow the engine to cool.
3.
Clean around the fuel tank cap and remove it
(Figure
9).
1. Fill with fuel here
2. Fuel cap
4.
Add fuel to the fuel tank, until the level is 6 to
13 mm (1/4 to 1/2 inch) below the bottom of the
filler neck.
Important:
This space in the tank allows
fuel to expand. Do not fill the fuel tank
completely full.
5.
Install the fuel tank cap securely.
6.
Wipe up any spilled fuel.
11
Figure 9
3. Fuel container
g020337
Advertisement
Table of Contents
