LG PQNFB17C1 Installation & Owner's Manual page 27

Installing the ACP BACnet in DIN RAIL
ACP BACnet can be installed in DIN RAIL with width 35 mm and height 7.5 mm.
Proceed to install the ACP BACnet in an adequate place.
The installation example shows using DIN Rail
Decide the space to install the ACP BACnet.
Before installing the ACP BACnet, check if it is the adequate place to connect the ACP
BACnet with the power, RS-485, and LAN cable.
Install DIN RAIL.
Hook the top part of the ACP BACnet on DIN RAIL.
Push the main body of the ACP BACnet until you hear the sound of installation.
Pull the ACP BACnet to check if it is fixed.
Caution
After installing to DIN RAIL, do not fix to the wall using screws.
ACP BACnet may be damaged.
DIN Rail fixing Screw Spec: M3, screw head height 2.0 ~ 1.75 mm, screw head diameter
7.0 ~ 5.5 mm
INSTALLING ACP BACnet
Hooking on DIN RAIL
Fixing to DIN RAIL
17