Bacnet - LG PQNFB17C1 Installation & Owner's Manual

1.
Press [SET] button of the ACP BACnet.
2.
Select [Function] menu, and press [SET] button.
3.
Select [S/W update] menu, and press [SET] button again.
4.
To run the software update, press [SET] button again.
Wait while software is running.
5.
After completing the update, press [SET] button to restart the ACP BACnet.
Even when you do not immediately restart, update will be applied only after rebooting the
ACP BACnet in the future.
PQNFB1 PQNFB17C0 NFB1 NFB1 NFB1 NFB1 NFB1 NFB1 NFB1 NFB FB1 FB1 FB1 FB FB1 FB FB1 F B1 B 1 B B B B B 1 B 1 B B1 B1 1 1 1 1 7C0 7 C0 7 7 7C
Caution
While software update is in progress and while "Please wait..." is displayed, turning off the
power of the ACP BACnet or removing USB memory may cause damage to the ACP BACnet.
Click
[SET]
button
C C C C C0 C0 C0 C0 C0 C0 0 0 0 0 0 0 0 0 0 0 0 0 0
Click
[SET]
button
Click
[SET]
button
Wait for
S10~20 sec.
INSTALLING ACP BACnet
Network Info
Contents
> Function
Register FD
[Function 1/2 ]
> S/W update
DB back up
DB recover
[S/W update]
SET : Yes ESC : No
Please wait...
[Completed]
Restart now?
SET: Yes ESC: No
39