Section 2 Setting Up Aspirenet - NEC Sl2100 Networking Manual

SL2100
phone user can store these codes under One-Touch Keys. This provides one-button operation for
almost any feature. To find out more, read the One-Touch Calling feature in your Feature &
Specifications Manual.
Programmable Keys...
When reading an instruction using programmable keys, you will see a notation similar to (PGM 15-07
or SC 851: 06 ). This means that the key requires function code 06, and you can program this code
through Program 15-07 or by dialing Service Code 851. Refer to the Programmable Function Keys
feature in your Features and Specifications Manual if you need more information.
S 2 SETTING UP ASPIRENET
ECTION
2.1 Required System Programming
As with any Voice Over IP (VoIP) implementation, there are several issues that
should be considered when setting up AspireNet IP.
2.1.1 System IP Address
• 10-12-09 : CPU Network Setup – IP Address-VOIPDB
Select the IP address of the VOIPDB (default: 172.16.0.10). A static IP address is required. Each
SL2100 system within the network must have a unique IP address.
The system must be reset in order for the change to take effect.
• 10-12-10 : CPU Network Setup – Subnet Mask-VoIPDB
Select the Subnet Mask to be used by the VOIPDB (default: 255.255.0.0).
Input Data
Item Item
No.
09 IP Address
(VOIPDB)
13-4
Input Data
1.0.0.1 ~ 126.255.255.254
128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254
Default Conditions
172.16.0.1 0 Set for VOIPDB.
ISSUE 1.0
AspireNet