Page 4
Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software and hardware described in this document is furnished under a license and may be used or disclosed only in accordance with the terms of such license.
Page 5
This document has been carefully checked by ABB but deviations cannot be completely ruled out. In case any errors are detected, the reader is kindly requested to notify the manufacturer.
Page 6
(Low-voltage directive 2014/35/EU). This conformity is the result of tests conducted by ABB in accordance with the product standard EN 60255-26 for the EMC directive, and with the product standard EN 60255-27 for the low voltage directive. The product is...
Page 7
Safety information Observe the following safety instructions when using the product. Before first usage, read the product documentation in order to ensure safe and reliable operation of SAM600 products. Dangerous voltages can occur on the connectors, even though auxiliary voltages are disconnected. Each SAM600 product must be safely connected to ground using the ground strap.
PCM600 is able to import SCD, ICD and CID files. All SCL files imported in PCM600 must include the original subnetwork of type "ABB-USB". In case a System Tool will remove this subnetwork the SCD import will fail or be refused by PCM600.
Make an export of the project that need to be migrated by selecting Open/Manage project Mark the project that need to be exported and select Export Project Install the type data modules versions to which migration needs to be done (e.g. ABB SAM600 module version 1.2.0.0). Open PCM600...