Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 151

Viewing images recorded on
"Memory Stick"s on your
computer
For Windows users
Recommended Windows environment
OS: Microsoft Windows 98, Windows 98SE,
Windows Me or Windows 2000
Professional, Windows XP HomeEdition,
Windows XP Professional standard
installation is required.
However, operation is not assured if the
above environment is an upgraded OS.
CPU: MMX Pentium 200 MHz or faster
The USB connector must be provided as
standard.
Installing the USB driver
Before connecting your VCR to your computer,
install the USB driver to the computer. The USB
driver is contained together with CD-ROM
which is supplied with your VCR.
If you have installed the USB driver in "Viewing
images recorded on tapes on your computer
(Windows user only)". Follow step 6 on page
152.
For Windows XP users
The USB driver needs not be installed. Your
computer is automatically recognized as a driver
just by connecting your computer using the USB
cable.
Set the USB MODE switch to
STICK). (The default setting is VCR.)
For Windows 98/98SE/Me, Windows 2000
Professional users
Log in with permission of Administrator. (For
Windows 2000 Professional users)
Be sure follow the steps before
connecting the USB cable to your
computer.
Connect the USB cable in step 7.
If the USB driver has been registered
incorrectly because your computer was
connected to your VCR before installation of
the USB driver was completed, re-install the
USB driver following the procedure on page
153.
(1) Turn on the power of your computer and
allow Windows to load.
(Continued on the following page)
(MEMORY
(1)
151