Quickly Locating A Scene Using The Zero Set Memory Function - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

Quickly locating a
scene using the zero
set memory function
Your VCR goes forward or backward to
automatically stop at a desired point having a
tape counter value of "0:00:00". Use the Remote
Commander for this operation.
(1) Press DISPLAY in the playback mode.
(2) Press ZERO SET MEMORY at the point you
want to locate later. The tape counter shows
"0:00:00" and the ZERO SET MEMORY
indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the tape
counter's zero point. The tape stops
automatically when the tape counter reaches
approximately zero. The ZERO SET
MEMORY indicator disappears and the time
code appears.
(5) Press H. Playback starts from the counter's
zero point.
Notes
•When you press ZERO SET MEMORY before
rewinding the tape, the zero set memory
function will be canceled.
•There may be a discrepancy of several seconds
from the time code.
If a tape has a blank portion in the recorded
portions
The zero set memory function may not work
correctly.
DISPLAY
m
x
(1)
(2)
(3)
x
(4) m
(5)
H
ZERO SET MEMORY
N
43