Step 2 Setting The Date And Time - Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual

Step 2 Setting the
date and time
Set the date and time when you use your VCR for
the first time. "CLOCK SET" will be displayed
each time that you set the POWER switch to ON,
unless you set the date and time.
If you do not use your VCR for about four
months, the date and time settings may be lost
(bars may appear) because the built-in
rechargeable battery installed in your VCR will
have been discharged (p. 203).
Set the year, month, day, hour and then the
minute, in that order.
(1)
Prepare the power supply (p. 14-18).
(2) While pressing PUSH OPEN v, open the
LCD panel.
(3) While pressing the small green button on
the POWER switch, set it to ON. The
POWER ON/CHARGE lamp (green) on the
front lights up.
(4) Press MENU to display the menu settings.
(5)
Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select
CLOCK SET, then press the dial.
(7) Turn the SEL/PUSH EXEC dial to adjust
the desired year, then press the dial.
(8)
Set the month, day, and hour by turning the
SEL/PUSH EXEC dial and pressing the
dial.
(9) Set the minute by turning the SEL/PUSH
EXEC dial and pressing the dial by the time
signal. The clock starts to move.
(10) Press MENU to make the menu settings
disappear.
2
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
3
PUSH OPEN
v
OFF ( CHG )
ON
POWER
19