Sony GV-D1000 Operating Instructions (primary manual) Operating Instructions Manual page 95

Audio dubbing
Monitoring the new recorded
sound
To play back the sound
Adjust the balance between the original sound
(ST1) and the additional audio (ST2) by selecting
AUDIO MIX in in the menu settings (p. 108).
Five minutes after you disconnect the power
source or remove the battery pack, the setting of
AUDIO MIX returns to the original sound (ST1)
only. The default setting is original sound (ST1)
only.
Note
Pictures are not output through S VIDEO jack or
the AUDIO/VIDEO jack. Check the recorded
picture on the screen. You can monitor the
recorded sound by using headphones.
VCR SET
P EFFECT
D EFFECT
HiFi SOUND
ST1 ST2
AUDIO MIX
A/V DV OUT
RETURN
[ MENU ] : END
95