Table of Contents
Advertisement
Important Information
Network Camera
WV-X6533LN, WV-S6532LN
Model No.
WV-X6533LN
* For information about the installation tasks, refer to the provided Installation
Guide. For information about how to perform the settings and how to
operate the camera, refer to the Operating Instructions on the following
Panasonic support website.
https://security.panasonic.com/download/
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Advertisement
Table of Contents
Related Manuals for Panasonic WV-X6533LN
Summary of Contents for Panasonic WV-X6533LN
- Page 1 Important Information Network Camera WV-X6533LN, WV-S6532LN Model No. WV-X6533LN * For information about the installation tasks, refer to the provided Installation Guide. For information about how to perform the settings and how to operate the camera, refer to the Operating Instructions on the following Panasonic support website.
-
Page 2: Table Of Contents
Contents Limitation of liability ........................3 Disclaimer of warranty ........................3 Preface ............................4 About notations ..........................4 Main functions ..........................4 About the user manuals ........................ 6 System requirements for a PC ...................... 6 Trademarks and registered trademarks..................7 Open Source Software ........................ -
Page 3: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 4: Preface
The following notations are used when describing the functions limited for specified models. The functions without the notations are supported by all models. X6533 The functions with this notation are available when using the model WV-X6533LN. The functions with this notation are available when using the model WV-S6532LN. S6532... - Page 5 This allows H.265 compression in addition to conventional H.264 compression technology, and when combined with Smart Facial Coding, reduces data load compared to our previous models. Panasonic’s own intelligent auto (iA) feature provides increased discernibility even in environments with poor visibility...
-
Page 6: About The User Manuals
• Installation Guide: Explains installation, mounting, cable connections, and network connec- tions. • Operating Instructions (on the Panasonic support website): Explains how to perform the settings and how to operate this camera. "<Control No.: C****>" used in this document should be used to search for information on the Panasonic support website and will guide you to the right information. -
Page 7: Trademarks And Registered Trademarks
• Refer to the “readme.txt” file on the provided CD-ROM for further information about open source software licenses and the source code. • Please note that Panasonic shall not respond to any inquiries regarding the contents of the source code. -
Page 8: Copyright
Copyright Except for open source software licensed under GPL/LGPL and so on, distributing, copying, disas- sembling, reverse compiling and reverse engineering of the software provided with this product are all expressly prohibited. In addition, exporting any software provided with this product violating export laws is prohibited. -
Page 9: Precautions
Precautions Do not insert any foreign objects. Do not install this product on a place that is greatly influenced by wind. Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, Installation on a place where the wind speed is enter inside the unit. - Page 10 Do not install this product in locations subject to vibration. Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents. : Caution, infrared radiation : Direct current symbol : Alternating current symbol This illustration represents WV-X6533LN...
- Page 11 When this product malfunctions due to exoge- Refer to the Operating Instructions on the nous noise, etc. for 30 seconds or more, the Panasonic support website for information product will automatically reset and will return to about how to change passwords.
- Page 12 (position refresh) to correct the camera position. Refer to the Operating Consumable parts Instructions on the the Panasonic support The following are consumables: Replace them in website for further information. accordance with their operating lifetimes. Their...
- Page 13 When “Position refresh” is set for the created schedule, the camera position will be corrected periodically. Refer to the Operating Instructions on the the Panasonic support website for how to perform the settings. Equipment classification and power source indication label...
-
Page 14: Precautions For Installation
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. For information about the installation tasks, refer to the provided Installation Guide. In order to prevent injury, the product •... - Page 15 Do not place this product in the following Heater unit places: This product is equipped with an internal heater • Locations where a chemical agent is used unit for use in cold climates. such as a swimming pool The heater unit turns on automatically when •...
- Page 16 Procure locally all Refer to the Operating Instructions on the the screws used for connecting. Panasonic support website for further informa- Recommended fixing screws: M3×8 mm with tion about the port forwarding function. spring washer Time &...
-
Page 17: Parts And Functions
Parts and functions 【Whole unit】 This illustration represents WV-X6533LN Cable cover (accessory) Safety wire Two-dimensional barcode (Data Matrix): To our website* IR LED Light Camera arm unit SD slot cover Front panel* Camera unit 【SD slot cover portion】 INITIAL SET switch LINK indicator (OFF⇔ON) - Page 18 ④ 8P alarm ③ cable (accessory) This illustration represents WV-X6533LN ①RJ45 (female) Network cable Connect an Ethernet cable (category 5e or better, straight) to the network connector. IMPORTANT: • Use all 4 pairs (8 pins) of the Ethernet cable. • The maximum length of the Ethernet cable (locally procured) is 100 m {Approx. 328 ft}.
- Page 19 ②Power supply terminal (24 V AC) / 24 V AC power supply connector kit (accessory) Caution: • A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED BY 24 V AC POWER SUPPLY. • ONLY CONNECT 24 V AC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).
- Page 20 Panasonic support website for descriptions of how to switch the output. • The video output is set to NTSC in the default settings of the camera. If you want to change the video output setting to PAL, refer to the Operating Instructions on the Panasonic support website.
- Page 21 Connection example Before starting the installation, check the entire system configuration. When connecting with a PC directly <Required cable> Ethernet cable (category 5e or better, cross) Powered speaker Ethernet cable (category 5e or better, cross) ➡ 24 V AC power supply Plug-in power type microphone...
- Page 22 Connecting to a network using a PoE+ hub /device when the temperature is –30 °C {–22 °F} or less When the temperature is –30 °C {–22 °F} or less, use a 24 V AC power supply or a tested PoE injector.
- Page 23 ■ Indicators and Switch ②LINK indicator ①INITIAL SET switch ③ACT indicator (OFF⇔ON) ④SD ERROR indicator SD slot ①INITIAL SET switch Use the INITIAL SET switch to reset the settings of the camera to the default. IMPORTANT: • When the camera is initialized, the settings including the network settings will be initialized. Before initializing the settings, it is recommended to write down the settings in advance.
- Page 24 Note: • Repeat this operation if information such as the MAC address and the IP address, etc. of this camera are not displayed in the [Panasonic IP Setting Software] screen, or if the administrator reg- istration window is not displayed.
-
Page 25: Insert/Remove An Sd Memory Card
Insert/remove an SD memory card Note: Refer to the Operating Instructions on the Panasonic support website for further information about the SD memory card settings. Refer to our website (https://security.panasonic.com/support/info/ <Control No.: C0107>) for latest information about the compatible SD memory cards. - Page 26 【2】 Insert an SD memory card. Step 1 Open the SD slot cover SD slot cover fixing screws Loosen 2 SD slot cover fixing screws (M4) at the rear part of the camera unit using a Phillips screwdriver, and open the SD slot cover. Step 2 SD slot cover Insert an SD memory card...
- Page 27 If an unformatted SD memory card or an SD memory card formatted with other devices is used, this product may not work properly or performance deterioration may be caused. Refer to the Operating Instructions on the Panasonic support website for how to format an SD memory card.
-
Page 28: Troubleshooting
The camera does not the position refresh function. (on the move to the preset In addition, when “Position refresh” is set for the cre- Panasonic positions accurately. ated schedule, the camera position will be corrected support periodically. In some situations, reconfigure the preset website) positions. - Page 29 Select “On” or “On(Access)” for the indicator setting. Instructions Indicators never (on the lights up. Panasonic support website) This indicator lights up red when data cannot be saved on the SD memory card. • Isn’t the write protect switch of the inserted SD mem- ory card set to “LOCK”?
- Page 30 Reference Symptom Cause/solution pages The power cable insu- • The power cable and connectors are worn out. lation is damaged. This may result in electric shock or a fire. Unplug the power cable from the power source imme- The power cable, diately, and refer to qualified service personnel.
- Page 31 Reference Symptom Cause/solution pages • The camera is still in the “Insert/Remove SD memory “Now Maintenance card” mode. Mode” is still being 25, 26 Click the [Exit] button of [Insert/Remove SD memory displayed in the card]. screen. • Operating on PoE. Use a PoE+ hub / device that is compliant with “Power supply is IEEE802.3at standard.
-
Page 32: Specifications
Specifications Basic • Power source * AC 24 V (50 Hz/60 Hz) PoE+ device (IEEE802.3at compliant) Tested PoE injector (60 W) Power consumption * AC 24 V : 3.4 A/Approx. 55 W PoE+ DC 54 V: 470 mA/Approx. 25 W (Class4 device) Tested PoE injector (60 W) DC 54 V: 1.0 A/Approx. - Page 33 *3 The audio output can be switched to the monitor output. Refer to the Operating Instructions on the Panasonic support website for descriptions of how to switch the output. *4 Only when installation work is properly performed according to the Installation Guide and appropriate waterproof treatment is performed.
- Page 34 On/ Off Up to 20 characters (alphanumeric characters, marks) Video Motion Detection (VMD): On/ Off 4 areas available Lens • WV-X6533LN WV-S6532LN Zoom ratio: 40x Optical zoom 22x Optical zoom 60x with HD Extra Optical Zoom * 34x with HD Extra Optical Zoom *...
- Page 35 Panning/tilting platform • Panning range: 360° Endless panning Panning speed: Manual: Approx. 0.065°/s – 150°/s Preset: Up to approx. 300°/s Tilting range: Operational range: –30° – 210° (level – downward – level) Recommended range * : 0° – 180° Tilting speed: Manual: Approx.
- Page 36 • Network Network: 10BASE-T/100BASE-TX, RJ45 connector Resolution * [16:9 mode] H.265/ H.264 1920×1080, 1280×720, 640×360, 320×180 JPEG (MJPEG) [4:3 mode] 2048×1536 * , 1280×960, 800×600, VGA, 400×300, QVGA Image compression method * H.265/ H.264 Transmission priority: Constant bit rate/ VBR/ Frame rate/ Best effort Frame rate: 1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/ 30 fps*/ 60 fps*...
- Page 37 Possible number of JPEG images that can be saved: <Control No.: C0306> Possible duration of stream images (H.265 or H.264) that can be saved: <Control No.: C0307> *7 Refer to our website (https://security.panasonic.com/support/info/ <Control No.: C0107>) for latest information about the compatible SD memory cards.
-
Page 38: Optional Accessories
Optional accessories Ceiling mount bracket: WV-Q121B Wall mount bracket (Fine silver) : WV-Q122A Wall mount bracket (Light gray) : WV-Q185 Pole mount bracket (Fine silver) : WV-Q188 * Pole mount bracket (Light gray) : WV-Q182 * Corner mount bracket (Fine silver) : WV-Q189 * Corner mount bracket (Light gray) : WV-Q183 *... - Page 39 For U.S. and Canada: For Europe and other countries: Panasonic Corporation of North America Panasonic Corporation Two Riverfront Plaza, Newark, NJ 07102-5490 http://www.panasonic.com http://business.panasonic.com/ Panasonic Corporation Panasonic Canada Inc. Osaka, Japan 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada Authorised Representative in EU: 1-877-495-0580 https://www.panasonic.com/ca/...