Husqvarna Automower 310 Operator's Manual page 25

To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Security > Security level .
3. Use the arrow buttons and the OK button to
select the level of security.
4. Push the OK button.
3.9.3.2 To change the PIN-code
To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Security > Advanced > Change PIN-code .
3. Enter the new PIN code.
4. Push the OK button.
5. Enter the new PIN code.
6. Push the OK button.
7. Make a note of the new PIN code. Refer to
Introduction on page 3 .
3.9.3.3 To change the length of the alarm
To get access to the menu
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Advanced > Duration > Duration of alarm .
3. Use the arrow buttons to select a time
interval of 1 to 20 minutes.
4. Push the BACK button.
3.9.3.4 To change the length of the time lock
1. Do steps 1–3 in To get access to the menu
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Advanced > Duration > Duration of time
lock .
3. Use the number buttons to select a time
interval of 1–90 days.
4. Push the BACK button.
3.9.4 Weather timer
1220 - 001 -
The Weather timer automatically adjust the
cutting time to the growth of the grass. The
product is not permitted to operate more than the
timer settings.
Settings >
The first operation of the day is set by the timer
settings. Then the Weather timer selects if the
product will continue to operate.
Note: The Weather timer is reset if the product
stops to operate for more than 50 hours or if a
Reset of all user setting is done. The Weather
timer is not changed if a Reset of timer settings is
done.
Settings >
3.9.4.1 To set the Weather timer
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
timer > Use weather timer .
3. Push the OK button to select the Weather
timer.
4. Push the BACK button.
3.9.4.2 To set the Weather timer frequency
Set how frequently the product must cut the
grass when the Weather timer is in use.
Security >
1. Do steps 1–3 in
on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
timer > Cutting time .
3. Use the arrow buttons to select
Medium or High frequency.
4. Push the BACK button.
3.9.5 Lawn Coverage
Security >
Lawn coverage function is used to guide the
The
product to remote parts of the work area. If the
work area includes areas that are connected with
narrow passages, the
useful to be able to maintain a well-cut lawn in all
parts of the yard. You can divide you lawn into 3
areas. The product begins to mow when it
reaches the
times, the product leaves the charging station in
the standard manner and starts to mow.
To get access to the menu
To get access to the menu
Low,
Lawn coverage function is
Lawn coverage point. At all other
Installation - 25
Weather
Weather