Settings in the service menu
7.2.2
Benchmark and Info menu
Menu item
Actual temp.
DHW flow rate
Hot water temp.Outlet temperature in °C
Table 17 Benchmark menu
Menu item
Current status
Current fault
Fault history
Boiler
Mx.heat.outp %
Mx.heat.outp kW
Actual temp.
Set flow temp.
Low-loss hdr.tmp
Heating mod.
Act. burner mod.
Burner output
Ionisation current
Pump mod.
Outside temp.
HC1 pump
Burner starts
Hours run
System pressure
Hot water
Max. outp.(%)
Max. outp.(kW)
DHW flow rate
DHW act. temp.
Hot water temp.
Act.DHWtmp.cyl.
DHW set temp.
Refilling settings
System pressure
System
Contr.device ver.
Progr. unit ver.
Code plug no.
Code plug ver.
Time prog. ver.
Solar
Collector temp.
Cyl.temp.bottom
Collector pump
Solar fault
Table 18 Info menu
50
Comment/restriction
Flow temperature in °C
Hot water flow rate in l/min
Comment/restriction
Tab. 24, page 67
Tab. 24, page 67
Max. heating output in %, Setting value in > Settings > Heating > Mx.heat.outp %
Max. heating output in kW
Flow temperature in °C
Setting value of the flow temperature
Only if installed. Momentary flow temperature in low loss header in °C
Burner modulation (heating) in %
Current burner output in kW
Current ionisation current in μA
Actual system pump modulation in %
Current outside temperature in °C
Current status on/off
Number of burner starts since commissioning
Elapsed time of the system since commissioning
Current system pressure in bar
Max. hot water output in %
Max. hot water output in kW
Current hot water flow rate in l/min
Actual hot water temperature in °C
Current water temperature in °C
Current storage temperature in °C
Setting value of the hot water temperature
Current system pressure in bar
Software version of the control device
Software version of the control unit
Coding plug number
Coding plug version
Version of installed key
Collector temperature
Cylinder temperature at bottom
Collector pump
Current faults
Greenstar 8000 Style – 6720883855 (2019/01)