NTP-B89 Modify Line Settings and PM Parameter Thresholds for Optical Ports
Figure 10-2 Provisioning SONET Thresholds for the OC48 IR 1310 Card
Step 3
Modify any of the settings listed in
See
Table C-3 on page C-8
default settings, or
Table 10-9 OC-N SONET Thresholds Options
Parameter
Port
CV
ES
SES
Cisco ONS 15327 Procedure Guide, R4.0
10-12
Table
for OC-3 card default settings,
Table C-5 on page C-12
Description
Port number
Coding violations
Errored seconds
Severely errored seconds
10-9.
Table C-4 on page C-10
for OC-48 card default settings.
Options
•
1 to 4 (OC-3)
1 (OC-12, OC-48)
•
Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click the Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click the Refresh button.
Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click the Refresh button.
Chapter 10
Change Port Settings
for OC-12 card
March 2003