Configuring - Siemens SINUMERIK 840D sl Commissioning Manual

Expanding the Operator Interface (BE1)
5 Configuring OP Hotkeys and PLC Keys
...
[Program]
...
[MessagesAlarms]
...
[ToolsZeroOffset]
...
[MachineMDI]
5.2.2

Configuring

One or more states (according to the State list) can be configured for each action
(≥ 100) and you can also specify which Expand user interface function is to be
initiated.
If nothing is configured in these INI files, no screen forms or softkey menus will
appear.
General notation:
Action.State=Screen form/softkey menu to be loaded, configuration file
Action =
State =
Configuration file = File in which the configuration is stored
LS/LM=
Examples
[KeyConfiguration]
100.10=LS("Softkey1","param.com")
100.30=LM("Form1","param.com")
101.10=LS("Softkey1","param.com")
101.30=LM("Form2","param.com")
102=LM("Form2","param1.com")
For the first line, for example, this means:
If an Action 100 is initiated when in state (status/screen) 10, the softkey menu
configured in file param.com will be displayed with the name softkey1.
For the last line, for example, this means:
If Action 102 is initiated, the screen form with the name screen form2 will be called
in the actual screen. This screen form is configured in file param1.com.
BE1/5-128
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
The action is Action >= 100 configured in the KEYS.INI.
State in which the application is presently in
Expand user interface - commands to load from
softkeys/screen forms
© Siemens AG, 2005. All rights reserved
08/2005