Configuring A Channel Menu; Switching The Tcu Via A Channel Menu - Siemens SINUMERIK 840D sl Commissioning Manual

Configuring a channel menu

7.1

Switching the TCU via a channel menu

A t:m configuration is a combination of operator station (t) and HMI sl system (m).
The switchover between the operator station with TCU to another HMI sl (and therefore to
another TCU), or to another channel of the displayed HMI sl, is performed with the "Channel
menu" function.
The TCU to which the switchover is to be made, is selected with the configured horizontal
softkeys.
The channel on the TCU to which the switchover is to be made, is selected with the
configured vertical softkeys.
All channel groups that are used on the system are configured in the "netnames.ini" file.
The version for the specific operator station is defined in the "config.ini" file.
Please refer to the following documentation for a detailed description of the configuration:
References:
Base Software and HMI Advanced Commissioning Manual, HMI Advanced (IM4), Section:
Configuring a channel menu
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
7
33