Siemens SINUMERIK 840D sl Commissioning Manual page 298

Service Commands
3.4 Description of the actions
current : IP=192.168.214.1 Netmask=255.255.255.0
MAC=08:00:06:73:55:fd
X130 (company network, eth1):
configured: DHCP
current : IP=111.222.333.64 Netmask=255.255.248.0
MAC=08:00:06:73:55:fe
X127 (engineering network, ibn0):
current : IP=192.168.215.1 Netmask=255.255.255.224
MAC=08:00:06:73:55:ff
Default gateway: 111.222.333.1 (via eth1)
Used nameserver: 127.0.0.1
Used DNS suffix: test.siemens.de local
The following data is displayed for each interface:
● Name: the name of the connection socket (X1_ _), together with the name used by the
● "configured": the IP address configured in the basesys.ini (variables
● "current": the currently set IP address together with the network screen form and MAC
● "DNS Name": Result of a DNS reverse lookup on the current IP address.
● "Nameserver": Here the list of DNS servers is output which are related to this interface
● "DNS Suffix": DNS search suffix related to this interface.
● "DHCP": Indication is given here if a DHCP client or server is running for this interface. In
● "Statistics": Total amount of data received or sent via this interface, and the percentage of
36
DNS Name : ncu1.local
Nameserver: 127.0.0.1
DNS Suffix: local
DHCP : synced server, prio=high, active
Statistics: RX=0.0MB (0.00% errors), TX=0.2MB (0.00% errors)
DNS Name : name.test.siemens.de
Nameserver: 111.222.333.12 111.222.333.13 111.222.333.14
DNS Suffix: test.siemens.de
DHCP : client (server: 111.222.333.221)
Statistics: RX=1.2MB (0.00% errors), TX=0.0MB (0.00% errors)
DNS Name : ncu-ibn
DHCP : server
Statistics: RX=0.0MB (0.00% errors), TX=0.0MB (0.00% errors)
operating system in brackets (ethN or ibnN).
ExternalIP/ExternalNetMask for X130, InternalIP/Internal-NetMask for X120), or
"(default)" if nothing is configured in the basesys.ini, or "DHCP" if the address was
sourced via DHCP.
address of the interface.
(receive e.g. DHCP via this interface).
the case of a client, the server where the IP address comes from is displayed, too. A
DHCP server on X120 can additionally be synchronized on the system network. Then the
information is displayed if this is the active server or if it is in standby mode.
faulty packages.
NCU Operating System (IM7)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0