Siemens SINUMERIK 840D sl Commissioning Manual page 210

HT 8
19.1 Configuring the traversing keys of the HT 8
"sljkconfig.ini" configuration file
Entries
[State_1]
ParamText_x_y
TextId_x_y
Picture_x_y
Procedure
1. Copy the "sljkconfig.ini" sample configuration file from the /Siemens/sinumerik/hmi/cfg
2. Store the copy in the directory /OEM/sinumerik/hmi/cfg
3. Open the copy in the Editor and define the traversing key labeling.
204
Meaning
Labeling type - changed via the PLC.
Text of the traversing key that is made up of parameters.
Two-line labeling is possible, whereby max. five characters is possible per line.
x: Specifies the position of the key within the row (2 to 7)
y: Specifies the key row (1 or 2)
%m1
%n
%a1
Text of the traversing key that is read from the text file (target language text).
File name of the icon to be displayed.
The files with the icons must be located in the following directories:
/OEM/sinumerik/hmi/ico and
depending on the resolution of the subdirectories:
/ico640
/ico800
/ico1024
/ico1280
directory.
or /User/sinumerik/hmi/cfg.
The machine axis name of the first axis is referenced and displayed as
text. The current active axis number is read out from data block DB10.
The name from the machine data is determined via this index.
Defines the position in the text for the line break.
The alias axis name of the first axis is referenced and displayed as text.
The current active axis number is read out from data block DB10. The
name from the "oem_sljk_eng.ts" text file is determined via this index.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)