Monitoring Parameter Identifiers; Magazine Location Parameter Identifiers - Siemens SINUMERIK 840D sl Commissioning Manual

Configuring tool management
13.3 Configure the tool lists
13.3.4

Monitoring parameter identifiers

For the monitoring parameters, the following identifiers are used in the configuration file:
Content_identifier
SupWarning
SupRemaining
SupDesired
SupWarningTime
SupRemainingTime
SupWarningPieces
SupRemainingPieces
SupDesiredTime
SupDesiredPieces
SupWarningWear
SupRemainingWear
SupDesiredWear
SupExtendedAlarm
SupWarningPiecesIncremental
SupActualPieces
EdgeSupUser_1,
EdgeSupUser_10
EdgeSupAppl_1,
EdgeSupAppl_10
13.3.5

Magazine location parameter identifiers

For the magazine location parameters, the following identifiers are used in the configuration
file:
Content_identifier
MagPlaceKind
MagPlaceType
MagPlaceTNo
MagPlaceWatchNeighbour
MagPlaceStateLocked
MagPlaceStateEmpty
MagPlaceStateResInterMag
MagPlaceStateResLoadTool
MagPlaceStateOccupiedLeft
MagPlaceStateOccupiedRight
90
Parameter or property
Warning limits, taking the current monitoring type into
consideration
Actual value, taking the current monitoring type into consideration
Setpoint, taking the current monitoring type into consideration
Tool life warning limit
Tool life actual value
Warning limit for count
Actual value for workpiece count
Setpoint for tool life
Setpoint for workpiece count
Prewarning limit for wear
Actual value for wear
Setpoint for wear
PLC tool management - extended alarm
PLC tool management - prewarning limit workpiece count
PLC tool management - actual value workpiece count
OEM cutting monitoring parameter 1, to
OEM cutting monitoring parameter 10
Siemens application cutting monitoring parameter 1, to
Siemens application cutting monitoring parameter 10
Parameter or property
Location kind
Location type
Tool number of the tool in this location
Consider adjacent location
Magazine location locked
Magazine location free
Reserved for tool in buffer
Reserved for tool to be loaded
Magazine location occupied, left half location
Magazine location occupied, right half location
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)