Standard Configuration - Siemens SINUMERIK 840D sl Commissioning Manual

Customizing the "Machine" operating area
10.4 Configuring the channel operational message
10.4.1

Standard configuration

"slmahdconfig.ini" file
The channel operational messages are configured in the "CondStopIcons" and
"CondDelayTime" sections.
Standard configuration
[CondStopIcons]
Default icon = condwait.png
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 = condwait.png
11 = condwait.png
12 = condstop.png
13 = condwait.png
14 = condwait.png
15 = condwait.png
15 = condwait.png
17 = condstop.png
18 = condstop.png
19 = condstop.png
20 = condwait.png
21 = condwait.png
22 = condstop.png
23 = condstop.png
24 = condwait.png
25 = condwait.png
26 = condwait.png
27 = condwait.png
28 = condwait.png
29 = condwait.png
30 = condwait.png
31 = condwait.png
32 = condstop.png
33 = condwait.png
34 = condwait.png
35 = condwait.png
36 = condwait.png
37 = condwait.png
38 = condwait.png
39 = condwait.png
40 = condwait.png
41 = condwait.png
42 = condwait.png
43 = condwait.png
44 = condwait.png
45 = condstop.png
66
condstop.png ; No NC ready
condstop.png ; No mode group ready
condstop.png ; EMERGENCY STOP active
condstop.png ; Alarm with stop active
condstop.png ; M0/M1 active
condstop.png ; Block in SBL mode terminated
condstop.png ; NC stop active
condstop.png ; Read-in enable missing
condstop.png ; Feed enable missing
; Dwell time active
; Aux. function acknowledgment missing
; Axis enable missing
; Exact stop not reached
; Waiting for positioning axis
; Waiting for spindle
; Waiting for other channel
; Waiting for feedrate override
; Error in NC block
; Waiting for external NC blocks
; Waiting for synchronized action
; Block search active
; Spindle enable missing
; Axis feedrate override
; Waiting for tool change acknowledgment
; Gear step change
; Waiting for position control
; Waiting for thread cut
; Reserved
; Waiting for punching
; Waiting for safe operation
; No channel ready
; Oscillation active
; Axis replacement active
; Axis container rotation
; AXCT: Following axis active
; AXCT: Leading axis active
; AXCT: Follow-up active
; AXCT: Internal status change
; AXCT: Axis/spindle disable
; AXCT: Corr. motion active
; AXCT: Axis replacement active
; AXCT: Axis interpolator active
; Waiting for compile cycle
; Access to system variable
; Search target found
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)