Cycles; Activating Cycle Support In The Editor - Siemens SINUMERIK 840D sl Commissioning Manual

Cycles

12.1

Activating cycle support in the editor

Channel-specific configuration machine data
The softkey display for the selection of the cycle support in the program editor is set via a
channel-specific configuration machine data item.
MD52200 $MCS_TECHNOLOGY
= 1
= 2
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
Setting for the turning technology
Setting for the milling technology
12
79