Displaying Details Of The Drive Objects - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics
16.9 Drive system
16.9.2

Displaying details of the drive objects

The following information is displayed for the drive objects:
● Status display (r0002)
● Commissioning parameter filter
● Current fault
● Current warning
Display icon
#
192
– The status display (parameter r0002) of the drive object is displayed.
– The enables are diagnosed except for the drive objects that do not have enable
signals (e.g. control unit). Missing enables are shown in a pane below the displays.
– (p0009) – control unit
The value of the "Device commissioning parameter filter" control unit parameter
(p0009) is displayed.
– (p0010) – further drive object
The value of the "Drive object commissioning parameter filter" parameter (p0010) is
displayed.
The number of the current drive object fault is displayed or "No fault present", when no
drive object fault is pending.
The number of the current drive object warning is displayed or "No warning present",
when no drive object warning is pending.
Green
Yellow
Red
Gray
Special
characters
Meaning
The relevant value of the drive object signals no problem
detected.
The relevant value of the drive object signals a less serious
problem, i.e. a warning is pending, for example, or enables
are missing.
The relevant value of the drive object signals a a serious
problem, for example, an alarm is pending.
The drive status could not be determined for this drive object.
Error when reading the data.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)