Customizing The "Machine" Operating Area; Setting The Font Size Of The Actual Value Display; Configuring The Display Of The G-Code Groups - Siemens SINUMERIK 840D sl Commissioning Manual

Customizing the "Machine" operating area

10.1

Setting the font size of the actual value display

The axis representation in the actual value window can be displayed in two different font
sizes in the "Machine" operating area.
You define how many axes should be displayed in a larger font via a channel-specific
configuration machine data item.
Configuring font size
MD52010 $MCS_DISP_NUM_AXIS_BIG_FONT
= 3
10.2

Configuring the display of the G-code groups

The "G-functions" pane is visible in the "Machine" operating area.
Up to a maximum of 16 G-code groups are displayed in this pane. Configure the
"sl_window_g_code.ini" file accordingly to determine which G-code groups should be
displayed, and where.
Configuring G-code groups
Section
Selected G groups
Selected G groups ISO
mode
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
Number of axes to be displayed in a larger font (default setting = 3)
Depending on the number of axes that are displayed in a larger font, the number of
axes that are displayed in the overall view is reduced. If, for example, four axes are
displayed in a larger font, only a total of five axes are displayed in the window.
Meaning
This area is intended for operation of the controller in Siemens mode.
This area is intended for operation of the controller in ISO mode.
10
61