Exporting The License Requirement - Siemens SINUMERIK 840D sl Commissioning Manual

5.2

Exporting the license requirement

After you have determined the license requirement, you can export the data via the set-up
external storage locations.
Procedure
Transferring a license requirement
The license information is transferred electronically with the "automation license manager".
A detailed description of the license management is provided in the following documentation:
References
CNC Commissioning Manual: NCK, PLC, Drive, in Section: Licensing
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
1. Press the "Export license requirement" softkey.
A small window opens listing the set-up storage locations.
2. Select "USB" for example, if you export the licenses on a USB
FlashDrive.
If you use the Automation License Manager (expansion module as of
V1.2 SP1), you must store the data in the root directory.
3. Press the "OK" softkey.
The set options, the license requirement and the license key are
stored in an Alm file. This file is used by the "automation license
manager" as the basis for licensing.
5.2 Exporting the license requirement
Licensing
25