Show - Siemens SINUMERIK 840D sl Commissioning Manual

Options
The options are used for selecting which directories of the file system are to be written to the
archive:
• full:
• addon:
• oem:
• user:
• addon+:
• oem+:
If "sc save" is used directly on the controller and the subsystems are running, this may lead
to inconsistencies between saved files, because they can still change during the backup
process. Therefore, in this case "sc save" normally ends in an error message to inform you
that subsystems are still running. If you want to create a backup anyway, you can use the
option "-force". "sc save" still issues a warning, but the process continues.
If "sc save" is started from the service system, no subsystems of the controller are running
and "-force" is not necessary.
Example:
sc save -user /tmp/drv01/backup.tgz
3.4.14

Show

Description
Syntax:
Alternative names:
Privilege level:
In the "sc show" command, various displays are grouped together showing the status of the
system.
show ip
Syntax:
Privilege level:
This command displays the IP address data of network interfaces. You have the option to
enter a specific interface. If no particular interface is specified, the data for all existing
interfaces is displayed, as well as the Default Gateway.
Example:
sc show ip
X120 (system network, eth0):
configured: (default)
NCU Operating System (IM7)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
complete backup (default): all files of the controller, incl. Boot Loader
only /addon directory
only /oem directory
only /user directory (user data)
/addon, /oem and /user
/oem and /user
sc show ip [-INTERFACE]
----
none
sc show ip [-INTERFACE]
none
Service Commands
3.4 Description of the actions
35