Siemens SINUMERIK 840D sl Commissioning Manual page 76

Customizing the "Machine" operating area
10.8 Configuring the simulation and simultaneous recording
Enter the meaning of the axes in the channel via the following channel-specific machine
data:
MD52206 $MCS_AXIS_USAGE
0 =
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
Enter the direction of rotation for the rotary axes that are not configured in a tool carrier of 5-
axis transformation via the following channel-specific machine data:
MD52207 $MCS_AXIS_USAGE_ATTRIB
Bit 0:
Bit 1:
Bit 2:
Bit 3:
Configuring the simultaneous recording
70
No special meaning
Tool spindle (driven tool)
Auxiliary spindle (driven tool)
Main spindle (turning)
C axis of the main spindle (turning)
Counterspindle (turning)
C axis of the counterspindle (turning)
Linear axis of the counterspindle (turning)
Tailstock (turning)
Steady (turning)
Rotation around 1st geometry axis (for rotary axes)
Rotation around 2nd geometry axis (for rotary axes)
Rotation around 3rd geometry axis (for rotary axes)
Reversal of direction of rotation (for rotary axes)
Software option
You require the following option for further simulation settings:
"3D simulation 1 (finished part)".
Software option
For the "Simultaneous recording" function, you require the option:
"Simultaneous recording (real-time simulation)".
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)