Siemens SINUMERIK 840D sl Commissioning Manual page 68

Customizing the "Machine" operating area
10.2 Configuring the display of the G-code groups
Enter the G-code group and position as follows:
SelectedGGroupN = M
N
M
Structure of the file
[Selected G-Groups]
SelectedGGroup1 = 1
SelectedGGroup2 = 2
SelectedGGroup3 = 3
SelectedGGroup4 = 4
SelectedGGroup5 = 5
SelectedGGroup6 = 6
SelectedGGroup7 = 7
SelectedGGroup8 = 8
SelectedGGroup9 = 9
SelectedGGroup10 = 11
SelectedGGroup12 = 12
SelectedGGroup13 = 13
SelectedGGroup14 = 14
SelectedGGroup15 = 15
SelectedGGroup16 = 16
[Selected G-Groups ISO-Mode]
... (as with section for Siemens)
Procedure
1. Copy the "sl_window_g_code.ini" file from the following folder:
2. Store the file in the following directory: /User/sinumerik/hmi/cfg
3. Open the file and enter the number of the G code in question at the required position
62
Position where G-code group M will be displayed.
If you want to leave a position empty, omit the number (M), e.g. "SelectedGGroup1 = "
The number of the G-code group to be displayed at position N
/Siemens/sinumerik/hmi/cfg
As soon as the file is located in the user-specific directory, e.g. User or Oem, the entries
for this file take precedence over the Siemens file. If an entry is missing in a user-specific
file, the corresponding entry from the Siemens file is used instead.
"SelectedGGroup1 = 5".
I.e. the 5th G code group will be displayed at the 1st position.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)