Procedure
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
1.
Select the "Diagnostics" operating area.
2.
Press the menu forward key.
New horizontal softkeys are displayed.
3.
Press the "Axis diagn." softkey.
The "Service Overview" window opens.
4.
Press the "Service axis" softkey.
The "Service Axis/Spindle" window opens.
5.
Press the "Axis +" or "Axis -" softkey.
...
The values of the next (+) and the previous (-) axes are displayed.
- OR -
Press the "Axis selection" softkey.
The "Axis Direct Selection" window opens.
Select the required axis directly from those available in the drop-down
list box.
6.
Confirm the selection with "OK."
The values of the axis are displayed.
Service and diagnostics
16.2 Displaying the Service overview
161