Siemens SINUMERIK 840D sl Commissioning Manual page 46

Machine and setting data
9.1 Machine and setting data
Changed display machine data
The display machine and setting data of NCU software version 2.4 has been assigned
different names, prefixes and numbers in software version 2.5, or omitted completely.
Display machine data omitted for software version 2.5
Display MD/SD up to NCU SW 2.4
$MM_DISPLAY_RESOLUTION_RotaryAxisIn = 3
TM_TOOL_MANAGEMENT=4
USER_BEGIN_WRITE_RPA_1=0
USER_BEGIN_WRITE_RPA_2=0
USER_BEGIN_WRITE_RPA_3=0
USER_CLASS_WRITE_RPA_1=7
USER_CLASS_WRITE_RPA_2=7
USER_CLASS_WRITE_RPA_3=7
USER_END_WRITE_RPA_1=0
USER_END_WRITE_RPA_2=0
USER_END_WRITE_RPA_3=0
Machine/setting data changed for software version 2.5
Display MD/SD up to NCU SW 2.4
$MM_DISPLAY_RESOLUTION = 3
$MM_DISPLAY_RESOLUTION_FeedPerRevolution = 3
$MM_DISPLAY_RESOLUTION_FeedPerTime = 3
$MM_DISPLAY_RESOLUTION_FeedPerTooth = 3
$MM_DISPLAY_RESOLUTION_ConstantCuttingSpeed = 0
$MM_ACT_VALUE_FONT_ZOOM_MODE=3
$MM_DISPLAY_RESOLUTION_INCH = 4
$MM_DISPLAY_RESOLUTION_INCH_FeedPerRevolution =
4
$MM_DISPLAY_RESOLUTION_INCH_FeedPerTime = 4
$MM_DISPLAY_RESOLUTION_INCH_FeedPerTooth = 4
$MM_DISPLAY_RESOLUTION_RotaryAxis = 3
$MM_DISPLAY_RESOLUTION_SPINDLE = 0
$MM_ACTIVATE_SEL_USER_DATA=1
$MM_ACTIVATE_FRAME_CHANGES_AT_ONCE=1
$MM_AXES_SHOW_GEO_FIRST=1
$MM_ONLY_MKS_DIST_TO_GO=0
$MM_BLOCK_SEARCH_MODE_MASK=51
$MM_MAX_SKP_LEVEL=1
$MM_SPIND_MAX_POWER=100
40
Display MD/SD as of NCU SW 2.5
Omitted
Omitted
Omitted
Omitted
Omitted
Omitted
Omitted
Omitted
Omitted
Omitted
Omitted
Display MD/SD as of NCU SW 2.5
MD51000 $MNS_DISP_RES_MM
MD51001 $MNS_DISP_RES_MM_FEED_PER_REV
MD51002 $MNS_DISP_RES_MM_FEED_PER_TIME
MD51003 $MNS_DISP_RES_MM_FEED_PER_TOOTH
MD51004 $MNS_DISP_RES_MM_CONST_CUT_RATE
MD51010 $MCS_DISP_NUM_AXIS_BIG_FONT
MD51010 $MNS_DISP_RES_INCH
MD51011 $MNS_DISP_RES_INCH_FEED_PER_REV
MD51012 $MNS_DISP_RES_INCH_FEED_PER_TIME
MD51013 $MNS_DISP_RES_INCH_FEED_P_TOOTH
MD51020 $MNS_DISP_RES_ANGLE
MD51021 $MNS_DISP_RES_SPINDLE
MD51025 $MNS_FRAMES_ACT_IMMEDIATELY
MD51025 $MNS_FRAMES_ACT_IMMEDIATELY
MD51026 $MNS_AXES_SHOW_GEO_FIRST
MD51027 $MNS_ONLY_MKS_DIST_TO_GO
MD51028 $MNS_BLOCK_SEARCH_MODE_MASK
MD51029 $MNS_MAX_SKP_LEVEL
MD51030 $MNS_SPIND_MAX_POWER
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)