Generating A Series Startup File - Siemens SINUMERIK 840D sl Commissioning Manual

Data backup

15.1 Generating a series startup file

NOTICE
USB FlashDrive
USB FlashDrives are not suitable as persistent memory media.
15.1 Generating a series startup file
A series startup file can be generated, for example, after the startup of the controller. To do
this, control components can be saved individually or jointly. However, it is recommended to
save the individual components separately in individual series machine startup files. It is thus
possible to reload them independently of each other.
It is also possible to transfer the backed-up data to other controllers so that they can be
updated to the same status.
Requirement
You will need at least access rights for protection level 2 (password: Service).
Data of the control components
Control components
NC data
142
You need the "Additional 256 MB HMI user memory on CF card of NCU"
option in order to display the "Local drive" softkey.
Data
Machine data
Setting data
Option data
Global (GUD) and local (LUD) user data
Tool and magazine data
Protection zone data
R parameters
Work offsets
Compensation data
Display machine data
Workpieces, global part programs and subprograms
Standard and user cycles
Definitions and macros
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)