Siemens SINUMERIK 840D sl Commissioning Manual page 177

Procedure
HMI sl (IM9)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
1. Select the "Diagnostics" operating area.
2. Press the "Version" softkey.
The window containing the version data appears.
.
3. Select the "Hardware" area and press the "Details" softkey. The
"Version Data / Hardware" window appears.
The "Add HW comp." softkey appears.
4. Press the "Add HW comp." softkey.
The "Select component" drop-down list box opens.
5. Select a category under which you would like to store the hardware
information.
The "Enter Additional Components (Configuration Data)" window
opens.
6. Enter additional hardware components via the keyboard.
- OR -
If you are using a CSV file (CSV = Comma Separated Values), for
example, a EUNA parts list, you can also read in the data.
To do this, press the "Read in CSV File" softkey.
All configured drives are displayed.
Select the storage location where the CSV file is located.
Select the file and press "OK".
The data is transferred from the CSV file into the table.
7. Press the "OK" softkey.
The data is written to the "version.xml" file and is now electronically
acquired.
All hardware components are displayed in the "Version Data /
Hardware" window.
The manually entered components are assigned a "+", e.g. Cable+.
Service and diagnostics
16.5 Calling up the version data
171