Configuring with EPLAN Add-In
5.4 Assigning drive objects
5.4
Assigning drive objects
Start the function via the "Siemens DQ-Topo" > "Assign drive objects" main menu.
Figure 5-12
"Assign drive objects" dialog
The dialog is divided into two areas:
● The devices of the active EPLAN project with the valid DRIVE-CLiQ type are displayed on
the left-hand side.
You will find further information in Section "EPLAN devices" (Page 28).
● The Drive object list with the properties of the drive objects (DO) and the associated
components are displayed on the right-hand side.
You will find further information in Section "Drive object list" (Page 29).
5.4.1
EPLAN devices
The item designation, the DRIVE-CLiQ type and descriptive information are displayed for each
EPLAN device.
The information for SIEMENS devices is taken from the SINAMICS product catalog.
The component distribution according to the SINAMICS product catalog is displayed and
defined for each Siemens device. This includes the component index, type, information on
DRIVE-CLiQ and other ports.
You can find information on how you can integrate other unknown devices in the topology in
Section Defining unknown devices (Page 19).
28
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA