Configuring with EPLAN Add-In
5.3 Define bus data
Figure 5-10
Example of the NCU connection X136
Bus master / Bus coupler
Bus system
Position / Node ID
MasterSystemID
Master ID
Example of the NCU connection X150 P1
Bus master / Bus coupler
Bus system
Position / Node ID
MasterSystemID
Master ID
Note
X150 connections
Only one of the two "X150" connections has to be configured because logically they represent
the same PROFINET interface.
If both connections are configured, the configurations must match.
26
Example - configuring bus data for the NCU
= e.g. "NCU-MPI/DP"
= "Profibus"
= "2" (defined value)
= "2" (defined value of the bus number)
Set; the checkbox is activated.
= e.g. "NCU-PN/IO"
= "Profinet"
= e.g. "2"
= e.g. "100" (value of the bus number)
Set; the checkbox is activated.
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA