Exporting The Drive-Cliq Topology - Siemens SINUMERIK 840D sl Operating Manual

5.5.2

Exporting the DRIVE-CLiQ topology

You can export the DRIVE-CLiQ topology via the "Siemens DQ-Topo" > "Export" main menu.
This creates an export file from EPLAN. This export file is suitable for the further processing
of the drive system configuration.
Figure 5-18
Note
Creating an export file
To create a complete export file, note that the following requirements must be satisfied:
● The drive objects have been assigned to the EPLAN devices
You will find information on this in Section Assigning drive objects (Page 28).
● The bus data has been configured
You will find information in Section Defining bus data (Page 22).
Creating an export file
To export the DRIVE-CLiQ topology, proceed as follows:
1. Select the required project.
2. With the option "Without/with DO list", you specify whether the DO list that has been used
is also exported.
3. Name the output file, whose file type is "*.sdx".
4. Click the "Export" button to perform the export.
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA
Exporting the DRIVE-CLiQ topology
Configuring with EPLAN Add-In
5.5 Exporting the DRIVE-CLiQ topology
33