Maintenance; Maintenance Safety; Recommended Maintenance Schedule(S) - Toro Groundsmaster 7210 Series Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.

Maintenance Safety

•
Before you leave the operator's position, do the
following:
– Park the machine on a level surface.
– Disengage the power takeoff and lower the
attachments.
– Engage the parking brake.
– Shut off the engine and remove the key (if
equipped).
– Wait for all movement to stop.
•
Allow machine components to cool before
performing maintenance.
•
If the cutting units are in the transport position, use
the positive mechanical lock (if equipped) before
you leave the machine unattended.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
After the first 50 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Maintenance Procedure
• Torque the frame-mounting bolts.
• Torque the wheel lug nuts.
• Change the cutting-unit gearbox lubricant.
• Change the engine oil and filter.
• Change the hydraulic fluid and filter.
• Test the safety-interlock system.
• Check the engine oil level.
• Check the engine coolant level.
• Clean the radiator with compressed air (more often in dirty and dusty conditions).
• Check the hydraulic fluid level.
• Clean the cutting unit and machine.
• Clean the machine.
• Clean and maintain the seatbelt.
• Grease the bearing and bushing grease fittings (more often in dirty or dusty
conditions and after every washing).
• Check battery cable connections.
• Check the tire pressure.
• Check the alternator-belt tension.
• Check the lubricant in the cutting-unit gearbox.
• Change the engine oil and filter.
• Inspect the cooling-system hoses and seals. Replace them if cracked or torn.
• Torque the wheel lug nuts.
•
If possible, do not perform maintenance while the
engine is running. Keep away from moving parts.
•
Support the machine with jack stands whenever
you work under the machine.
•
Carefully release pressure from components with
stored energy.
•
Keep all parts of the machine in good working
condition and all hardware tightened, especially
blade-attachment hardware.
•
Replace all worn or damaged decals.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
33