D-Link DIR-878 User Manual page 26

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual
9. In the opened Wireless Network Connection window, select the wireless network
DIR-878 (for operating in the 2.4GHz band) or DIR-878-5G (for operating in the 5GHz
band) and click the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) in the Security key field and click the OK button.
11. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
Figure 11. The list of available networks.
Page 26 of 191
Installation and Connection