Panasonic U-16GE2E5 Test Run Manual page 22

Checking and adjusting the date and time
Checking the date and time
a) Select the menu item "    " to display the current date.
Example:  (April 1, 2008, in the example)
b) With the date displayed, press the SET (S007) key to change to the time display.
Example:  (11 : 05 : 25 in the example)
c) With the time displayed, press the SET (S007) key to change to the date display again.
* If the current date and time are not displayed correctly, re-set (adjust) them.
Setting (adjusting) the date and time
a) With either the date or time displayed, press the SET (S007) key for 1 second to change to the setting mode.
Example:  (2012 in the example)
b) Each press of SET (S007) confi rms the setting and changes the indication for the 1st digit, and the setting item
becomes as shown in the table.
The indication for the fi rst digit returns to " " after "  "
Table 2
First digit indication




Minute and second

c) When each of the items is displayed, pressing the UP (S005) or DOWN (S006) key allows you to change the
value.
When the "  " indication is displayed and the SET (S007) key is pressed to confi rm the value, the second value
always becomes "0."
d) Press the HOME (S004) key to complete the setting operation.
Example setting/state
Item
Year

Month

Day

hour


II - 14
Meaning of indication
indication
2012
April
1st
11 hours
6 minutes