Opc Da Integration Configuration - Siemens DMS8000 Application & Planning

3.2.10 OPC DA integration configuration

‡
See MM8000 MP4.81 Release Notes (Doc. # A6V10062509)
Building Technologies
CPS Fire Safety
Fig. 30 OPC DA integration configuration example
System architecture
This configuration allows for the integration of 3
OPC server, which can run on a separate PC or on the management station server.
OPC connectivity for subsystems can be provided in two ways:
Generic OPC subsystem tool: No software development necessary, but lim-
–
ited functionality and requires more engineering.
For details, see the OPC Connectivity Guide (A6V10065253).
è
Specific OPC subsystem tool: Requires development of a Composer subsys-
–
tem tool (has been done for SIMATIC S7 and RCO R-Card M5).
Communication/connection
For the communication to/from the 3
Ethernet to the OPC server provided by the subsystem. This OPC server may run on
a networked PC or on the MM8000 Management Station.
Subsystems that can be connected in this way
Type Name
I/O System SIMATIC S7
(PLC)
Access Control RCO R-Card M5
049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
Automation level configurations
rd
party subsystems equipped with an
rd
party subsystem(s), MM8000 connects via
Version
MM8000
MP4.81
‡
X
‡
X
Supported by
MK8000
MP4.81
09.2016
45