Bosch REXROTH IndraControl VEH 30.2 Project Planning Manual page 88

Hand-held terminal
Table of Contents

Advertisement

86/109
Bosch Rexroth AG
Software
Visualization Data Source
UDP Communication
Visualization
Fig.9-4:
Rexroth Settings: Application Settings
Server IP: IP address of the control connected via Ethernet.
Control IP: IP address of the control to which the UDP telegrams are to
be sent.
Send UDP real time telegram to control: Selection, if the data is to be
sent to the control (control IP) via UDP telegram.
The following data is sent to the control (control IP) via UDP telegram:
Key codes for IndraControl VEH 30.2
Data of the additional elements for IndraControl VEH 30.2. Additional el‐
ements are e.g. handwheel, override, key switch.
None: Visualization software is not automatically started.
Remote Desktop: Autostart of the Remote Desktop Client. A PC with
Remote Desktop Server in the network is operated by remote control via
the IndraControl VEH 30.2.
Web Browser: Start of a web visualization.
WinStudio: Autostart of the "StorageCard\Rexroth\Winstudio\start‐
up.cmd" file. This file can be modified to adapt the start behavior. If
WinStudio has been selected, the OPC server is registered and the cor‐
responding information is entered in the "OPCServer.ini".
VisiWin:Autostart of the "StorageCard\Rexroth\VisiWin\startup.cmd" file.
This file can be modified to adapt the start behavior.
User Start: Autostart of the "StorageCard\Rexroth\User\startup.cmd" file.
If this option has been selected, the PLC is not automatically started – in
contrast to all other selection possibilities. The user can define the com‐
plete start process in this file.
IW Operation: If this option has been selected, the IndraWorks Opera‐
tion Desktop starts.
Upload from Data Source:Loads the "startup.cmd" file via a FTP server
from the control (Visualization Data Source) to "StorageCard\Rexroth
\startup.cmd". Please observe that a FTP server has to be activated on
the control to do this.
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal

Advertisement

Table of Contents
loading

Table of Contents